Navigation Bridge Visibility
Ships of not less than 55 m in length (Overall Length) and constructed on or after 1 July 1998 shall meet the below requirement in relation to the navigation visibility and according to the SOLAS 2006 Amend / Chapter V / Reg. 22.
Lifeboat releasing mechanisms
There are different types of lifeboats used on board a ship on the basis of the type of ship and other special requirements. Not all the lifeboats have the same type of releasing mechanisms, for the launching of a lifeboat depends on several other factors. In this article, we will take a look at the main types of “lifeboat releasing mechanisms”.
Recovery of persons from the water
Refer to the SOLAS 2012 Amend / Chapter III / Reg. 17-1, all ships shall have ship-specific plans and procedures for recovery of persons from the water, taking into account the guidelines developed by the Organization. (MSC.1/Circ.1447)
Guidelines for implementation of the ISM code by companies
The International Management Code for the Safe Operation of Ships and for Pollution Prevention (International Safety Management (ISM) Code) was adopted by the Organization by resolution A.741(18) and became mandatory by virtue of the entry into force on 1 July 1998 of SOLAS chapter IX on Management for the Safe Operation of Ships.
The purpose of this Code is to provide an international standard for the safe management and operation of ships and for pollution prevention.
Ballast Water Management Convention
Following the UN Conference on Environment and Development (UNCED), held in Rio de Janeiro in 1992, the IMO initiated negotiations to consider the possibilities of developing an internationally binding instrument to address the transfer of harmful aquatic organisms and pathogens in ships’ ballast water. From 1999 onwards, the Ballast Water Working Group, established by the MEPC in 1994, focused on the preparation of a free-standing Convention on control and management of ships’ ballast water and sediments. Finally, on the basis on these measures, The BWM convention adopted in 2004.
Biofouling An overview of regulations globally
As new requirements for managing bio-fouling on international vessels arriving in Australia will begin on 15 June 2022, more countries around the world have already established similar regulations to address the effects of bio-fouling.
Ship Energy Efficiency Management Plan (SEEMP) PART I
Regulation 26.1 of MARPOL Annex VI requires each ship of 400 gross tonnages and above, subject to Chapter 4 to keep on board a ship specific Ship Energy Efficiency Management Plan (SEEMP). The purpose of Part I of SEEMP is to establish a mechanism for a company and/or a ship to improve the energy efficiency and reduce the carbon intensity of a ship's operation. Preferably, this aspect of the ship-specific SEEMP is linked to a broader corporate energy management policy for the company that owns, operates or controls the ship, recognizing that no two shipping companies are the same, and that ships operate under a wide range of different conditions.
PART II OF THE SEEMP - SHIP FUEL OIL CONSUMPTION DATA COLLECTION PLAN
Regulation 26.1 of MARPOL Annex VI requires each ship of 400 gross tonnages and above, subject to Chapter 4 to keep on board a ship specific Ship Energy Efficiency Management Plan (SEEMP). The purpose of Part I of SEEMP is to establish a mechanism for a company and/or a ship to improve the energy efficiency and reduce the carbon intensity of a ship's operation. Preferably, this aspect of the ship-specific SEEMP is linked to a broader corporate energy management policy for the company that owns, operates or controls the ship, recognizing that no two shipping companies are the same, and that ships operate under a wide range of different conditions.
PART III OF THE SEEMP - SHIP OPERATIONAL CARBON INTENSITY PLAN
The Carbon Intensity Indicator (CII) is a rating system for ships that the International Maritime Organization (IMO) developed. This will be a mandatory measure under MARPOL Annex VI, which comes into force in 2023.
©2023 All Rights Reserved